Everyone

Loxone

Jelly Bean

<b>New since v1.4.1: create your own Tasks and activate them from third party Apps like Tasker or Locale</b>

***To Unlock all features and remove the device limitation, download BlueHome Unlocker.***

BlueHome is a stylish application to control your EIB/KNX installation from the palm of your hand using your phone or tablet. 

Do you have a EIB/KNX installation at your home, apartment or hotel, then you can use BlueHome to control the lights, heating, blinds, etc. from your Android phone or tablet. No need for a fancy and expensive server. BlueHome only requires an KNX IP gateway connected to your KNX system.

Simply add the different devices you wish to control to BlueHome. Once you have created your devices, you can place them in different "Rooms" or "Categories" for easy access. 

The application can be configured without knowledge of the KNX system or your ETS configuration. Through the use of the build in <b>assistent</b>, many of your devices can be automatically configured. Simply tap the "assist" button on your phone or tablet and use your real KNX devices (e.g., a dimmer or switch) to perform the required action. BlueHome will automatically capture the resulting messages and use them to configure itself!

For more advanced users, it is also possible to manually configure devices by assigning group addresses.

Connect BlueHome to your KNX system using any KNX/IP Gateway, including the open source <i>eibd</i> server software.

Features:

- Full configuration in the App itself, no need for separate configuration software

- <b>Assistent</b> allows users to configure their devices without any knowledge of KNX messages or the ETS configuration

- Stylish interface that is adapted to both tablets and phones

- Arrange your devices in Rooms/Categories

- Use Spacers to arrange your devices into practical groups

- If needed, you can add multiple "Pages" to each Room or Category

- Bus Monitor that captures all messages on your system: convenient when configuring BlueHome

- Share your configuration with other devices using email

Supported devices (more will become available):

- (Light) switches

- Light dimmers, both absolute (slide) and relative (tap and hold) dimmers

- Scene selection

- Blinds up/down/stop

- Heating mode

- Setpoint temperature control

- Room temperature monitor

- "Generic" sensor to visualize virtually any datapoint

</div> <div class="id-app-translated-desc" style="display:none"><b>新自V1.4.1：创建自己的任务，并从第三方应用程序，如塔斯克和区域设置激活它们

***解锁所有功能，并删除该设备的限制，下载BlueHome解锁。***

BlueHome是一个时尚的应用程序从你手上使用您的手机或平板电脑的手掌控制你的EIB / KNX安装。

你有一个EIB / KNX安装在你家，公寓或酒店，那么你可以使用BlueHome从你的Andr​​oid手机或平板电脑控制的灯光，暖气，百叶窗等。无需看中和昂贵的服务器。 BlueHome只需要连接到KNX系统的KNX IP网关。

只需添加要控制到BlueHome不同的设备。一旦你创建了你的设备，你可以将它们放置在不同的“房间”或“类别”为方便。

应用程序可以没有知识的KNX系统或ETS配置进行配置。通过以<b>助理使用的build ，你的许多设备都可以自动配置。只需轻按手机或平板电脑上的“帮助”按钮，并使用你的真实KNX设备（如调光或开关）来执行所需的操作。 BlueHome会自动捕捉得到的消息，并用它们来配置自身！

对于更高级的用户，也可以通过分配组地址手动配置的设备。

连接BlueHome使用任何KNX / IP网关，包括开源的<i> eibd 服务器软件的KNX系统。

产品特点：

 - 在应用程序本身，无需单独配置的软件全部配置

 -  <b>助理允许用户无需KNX信息的任何知识或ETS配置配置设备

 - 时髦接口，其适于两个片剂和电话

 - 安排你的房间/分类设备

 - 使用垫片来安排您的设备转化为现实群体

 - 如果需要，可以添加多个“页”，以每间客房或类别

 - 公交车监视器捕获系统上的所有信息：方便的组态时BlueHome

 - 使用电子邮件其它设备分享你的配置

支持的设备（更将成为可用）：

 - （光）开关

 - 调光器，无论是绝对的（幻灯片）和相对（点住）调光器

 - 场景选择

 - 百叶窗向上/向下/停止

 - 加热方式

 - 设定点的温度控制

 - 房间温度监控器

 - “通用”传感器的可视化几乎所有的数据点
</b>
</i>

</b>

</b></div> <div class="show-more-end">

BlueHome

BlueHome的最新版本